ຂ່າວອຸດສາຫະ ກຳ

ປຶກສາຫາລືເຫດຜົນຂອງຄວາມເສຍຫາຍດ້ານການປະທັບຕາວາວ

2021-07-19
ວາວແມ່ນອຸປະກອນທໍ່ທີ່ໃຊ້ເພື່ອເປີດແລະປິດທໍ່, ຄວບຄຸມກະແສ, ປັບແລະຄວບຄຸມຕົວ ກຳ ນົດ (ອຸນຫະພູມ, ຄວາມກົດດັນແລະການໄຫຼວຽນ) ຂອງສື່ກາງ. ຈາກວາວປິດທີ່ງ່າຍດາຍທີ່ສຸດຈົນຮອດວາວຕ່າງໆທີ່ໃຊ້ໃນລະບົບຄວບຄຸມອັດຕະໂນມັດທີ່ສັບສົນທີ່ສຸດ, ມັນມີຫລາຍແນວພັນແລະຂໍ້ສະເພາະ. ເສັ້ນຜ່າກາງທີ່ມີຊື່ສຽງຂອງປ່ຽງຕັ້ງແຕ່ປ່ຽງເຄື່ອງມືຂະ ໜາດ ນ້ອຍຈົນເຖິງປ່ຽງທໍ່ອຸດສາຫະ ກຳ ທີ່ມີເສັ້ນຜ່າສູນກາງເຖິງ 10 ມ. ມັນສາມາດຖືກ ນຳ ໃຊ້ເພື່ອຄວບຄຸມການໄຫຼວຽນຂອງທາດແຫຼວປະເພດຕ່າງໆເຊັ່ນ: ນ້ ຳ, ອາຍ, ນ້ ຳ ມັນ, ອາຍແກັສ, ຂີ້ຕົມ, ສື່ທີ່ຫລາກຫລາຍ, ໂລຫະທາດແຫຼວແລະທາດແຫຼວທີ່ລະບາຍ. ຄວາມກົດດັນໃນການເຮັດວຽກຂອງປ່ຽງສາມາດຈາກ 0.0013MPa ເຖິງ 1000MPa ຄວາມກົດດັນສູງສຸດ, ແລະອຸນຫະພູມທີ່ເຮັດວຽກສາມາດ c-270⃃ອຸນຫະພູມຕໍ່າສຸດເຖິງ1430â„ temperature ອຸນຫະພູມສູງ. ທປ່ຽງ sealing surface is often damaged during the use of the ປ່ຽງ, and the damage will cause internal leakage. Why does this happen? There are many aspects to understand here, let's take a look together.
ຄວາມເສຍຫາຍດ້ານກົນຈັກ, ພື້ນຜິວຂອງການຜະນຶກຈະໄດ້ຮັບຄວາມເສຍຫາຍຈາກຮອຍຂີດຂ່ວນ, ຮອຍຂີດຂ່ວນ, ການປັ່ນປ່ວນແລະອື່ນໆໃນລະຫວ່າງການເປີດແລະປິດ. ລະຫວ່າງສອງພື້ນທີ່ປະທັບຕາ, ພາຍໃຕ້ການປະຕິບັດງານຂອງອຸນຫະພູມແລະຄວາມກົດດັນສູງ, ປະລໍາມະນູແຜ່ລາມແລະເຊື່ອມຕົວເຊິ່ງກັນແລະກັນ, ເຮັດໃຫ້ເກີດການຍຶດຕິດ. ໃນເວລາທີ່ສອງດ້ານຂອງການຜະນຶກເຂົ້າກັນແລະກັນ, ການຍຶດຕິດໄດ້ງ່າຍດາຍ. ຄວາມຫຍາບສູງຂອງ ໜ້າ ປະທັບຕາສູງຂື້ນ, ປະກົດການນີ້ຈະເກີດຂື້ນ. ພື້ນຜິວຂອງການຜະນຶກປ່ຽງ will be scratched and crushed during the closing process of the ປ່ຽງ and the ປ່ຽງclack ໃນລະຫວ່າງການຂະບວນການເຮັດບ່ອນນັ່ງຄືນ ໃໝ່, ເຊິ່ງກໍ່ໃຫ້ເກີດການສວມໃສ່ຫລືການຂູດຮີດໃນທ້ອງຖິ່ນຢູ່ດ້ານປະທັບຕາ.
ການເຊາະເຈື່ອນຂອງສື່ກາງແມ່ນຜົນມາຈາກການສວມໃສ່, ການຊັກແລະເຄື່ອງຈັກໃນດ້ານການຜະນຶກໃນເວລາກາງ. ເມື່ອສື່ກາງມີຄວາມໄວທີ່ແນ່ນອນ, ບັນດາອະນຸພາກອັນດີງາມທີ່ລອຍຢູ່ໃນສື່ກາງແຊກແຊງເຂົ້າໃນພື້ນທີ່ປະທັບຕາ, ສ້າງຄວາມເສຍຫາຍໃຫ້ກັບທ້ອງຖິ່ນ. ຂະ ໜາດ ກາງທີ່ເຄື່ອນຍ້າຍດ້ວຍຄວາມໄວສູງໄດ້ລ້າງ ໜ້າ ທີ່ປະທັບຕາໂດຍກົງແລະເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍໃນທ້ອງຖິ່ນ. ໃນເວລາທີ່ສື່ກາງປະສົມແລະມີການອະນຸຍາດບາງສ່ວນ, ຟອງອາກາດແລະລະເບີດຈະຖືກຜະລິດ. ສົ່ງຜົນກະທົບຕໍ່ພື້ນຜິວຂອງປະທັບຕາ, ເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍໃນທ້ອງຖິ່ນ. ການເຊາະເຈື່ອນຂອງຂະ ໜາດ ກາງແລະການປະຕິບັດທາງເລືອກຂອງການເຊາະເຈື່ອນທາງເຄມີຈະເຮັດໃຫ້ພື້ນຜິວຂອງການຜະນຶກເຂົ້າກັນໄດ້ຢ່າງຫຼວງຫຼາຍ.
Electrochemical corrosion, the contact between the sealing surfaces, the contact between the sealing surface and the sealing body and the ປ່ຽງ body, the concentration difference of the medium, the oxygen concentration and other reasons, will produce a potential difference, electrochemical corrosion will occur, and the sealing surface of the anode will be corroded.
The chemical corrosion of the medium, the medium near the sealing surface does not produce current, the medium directly chemically interacts with the sealing surface, corroding the sealing surface. Improper installation and poor maintenance have caused the sealing surface to work abnormally, and the ປ່ຽງ runs ill, which prematurely damages the sealing surface.
ຄວາມເສຍຫາຍທີ່ເກີດຈາກການຄັດເລືອກທີ່ບໍ່ຖືກຕ້ອງແລະການ ດຳ ເນີນງານທີ່ບໍ່ດີ. ການສະແດງອອກຕົ້ນຕໍແມ່ນວ່າປ່ຽງ is not selected according to the working conditions, and the shutoff ປ່ຽງ is used as a throttle ປ່ຽງ, which leads to excessive closing specific pressure and closing too fast or not tightly, causing the sealing surface to be eroded and worn. The processing quality of the sealing surface is not good, mainly manifested in the defects such as cracks, pores and ballast on the sealing surface, which are caused by improper selection of surfacing and heat treatment specifications and poor manipulation during surfacing and heat treatment. The sealing surface is too hard. Or too low, due to the wrong material selection or improper heat treatment. The sealing surface has uneven hardness and is not resistant to corrosion, mainly because the underlying metal is blown to it during the surfacing process, which dilutes the alloy composition of the sealing surface. of. Of course, there are also design issues.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept